Neopixel Connectors

Here we have our new CCSabers neopixel connectors.

-LEDs are soldered by machine this time. More aligned.

2A continuous current and 3A steep for each pin.

One set includes a PCB, A holder (1" or 7/8"), and short pogo pins.

Latest Manual: Click me! 

Extra holders can be purchased here: Click me!

LEDs and SMD resistors are already soldered on board even for the unsoldered option!!!

For the soldered option, I will solder the pogo pins for you. (Buy four and you will get free shipping domestically!)

Blade side PCB's used for making neopixel blades, blade plugs, and other neopixel connections.

One set includes a PCB and a holder.

Two holder sizes at your choice, which are for 1 blade and for 7/8 blade.

Here we have our Six-Rail Connector V2. It can be used for a fully removable chassis.

Dimensions:

Diameter: 22mm 

Height: 1.6mm

Soldering Pads on the PCB:

-: For the neopixel negative

Data: For the neopixel data

+: For the neopixel positive

B1: For a button/switch

GND: Common ground for switches

B2: For another button/switch

One Set Includes:

-2x PCBs: Matte Black Soldermask, Immersion Gold Plate

-18x Gold Plated Pogo Pins

Disclaimer:

Please use this at your own risk. Make sure you know what you are buying and what you are doing. Improper usage will cause electronic parts to be damaged as well as do harm to the user.

High-quality factory 3D print holders for CCS neopixel connectors.

Two sizes: 1" and 7/8".

Standard height: 10mm

Low profile holders are for lightsabers such as thin-neck. Height: 6mm

Both white and black holders are factory printed. The white one is printed resin. The black one is printed in SLS nylon. Send color randomly.

Notice: Price is for one holder.

This is the version without LEDs and an onboard resistor. Offer installers a more affordable option.