The Third - Replica Lightsaber Hilt
The Third. Pre-Order. The lead time is about 6 weeks from now (8/23/2022).
This is an empty hilt. No electronics and blades are included.
Hilt dimensions: 45cm x 32cm. Weight: 900g.
The ring can be folded.
The surface is polished, chromed, and anodized.
The one in the picture is the prototype. The final product may be a little different.
I liked how small and easy they were to install.
Shipped very fast. Even if it was backordered, it arrived in 2 weeks. Responded very quickly when asking for status of my order. Only thing is one of the rubber grips came off but I am able to use double sided tape so that wasn't a big issue.
Very great quality, I love the material and the feel. I did wish it came with assembly instructions for this specific saber because I was confused at first
A very sleek and good looking hilt with a visible kyber crystal. Only drawback is the chassis, which is very tight for the battery and to get to the SD card, I had to push the proffie board a bit up and thank god, nothing broke. Sadly 89 Sabers did not provide a saber stand, but this is not CCSabers fault. I am happy with this hilt :)
Thanks for the repair! My birthday grift is now working fine thanks to you! If I buy another saber it will be from CCSabers!
Definitely exactly what I was expecting. Not an expensive saber but a whole bunch of fun. Nice quality build too
Fantastic saber with excellent quality details. About as film accurate as you can get. Very impressed!
The saber is most excellent! The only thing to complain about is that the screw that goes through the Covertec wheel is too small with the wheel. But I was going to remove that anyways. Fantastic saber!
Fantastic lightsaber and blade! Super bright and amazing sound. Configuring the Proffieboard took a little bit of getting used to, but after a few hours I've got the blade I've always dreamed of! Hard carrying case is rather flimsy, but everything shipped well and arrived quickly.
This is the best neopixel lightsaber ever! I absolute love it. For one, the Graflex handle is an absolutely perfect screen accurate replica, for two the sound fonts are easy to switch, it's a lightweight saber that is easy to carry on the belt and even easier to duel with. It's high quality, loud, bright and the poffie board is amazing with super sensitive sound movements and high quality sounds and effects. I'm definitely going to be ordering another! Highly recommend. Literally could not be happier!
Let me start off first with saying that this is the most incredible saber I've ever felt. I've had multiple LGT character replica hilts and this is my first 89sabers hilt, so the change is insane. Dooku's lightsaber has been a dream of mine for having since I was a small kid watching the Clone Wars. I tried to make his saber out of the plastic pieces at the old Disneyland as kid, which is obviously not accurate at all. This however, is very different. To help make things easier, I will break this down into a few categories so you can teel if the saber suits you. (By the way, since the proffie board can be tricky to program, feel free to email me at: [****] , as I'm majoring in computer engineering and can help you out;)
1. Quality- OUT OF THIS WORLD. The most comfortable lightsaber ever, as the rubber grips and curve of the saber make it feel like it is a part of your body. The weight is amazing and is light with a quality feel of heft. There is a counterweight at the bottom of the saber, as the pommel has the board and speaker inside of it, which can aid with swinging as the wight transfers into momentum very smoothly.
2. Saber Features- Since it is a Proffieboard, the customization is endless and this can be seen in the blade and speaker. The blade is a 7/8 inch blade that is very light, and I mean very. I've had multiple 7/8 inch blades from LGT hilts and this one is about half the weight, and even brighter. The natural curve of the hilt allows you to swing very comfortably and preserve stamina, just as Dooku designed it.
3. Accessories- As seen in some of the photos, the saber comes with an amazing suede carrying bag with the separatist insignia on it, signifying Dooku's allegiance. The included custom stand is also very unique and super high quality, as it is very hefty for a stand. There is also a very nice blade plug that looks amazing when the blade isn't in, for display. Lastly, aside from the hardware and manual, the case it comes in is a very high quality plastic and metal box with the companies logo on it.
Company- Amazing company. Really. The owner, Carl is very helpful and responded to my questions very fast (asked at about 9:30 AM and got an email back around 10:45-11:00). The response time and ability to work with me really stood out, and I'm very appreciative of that. The next time I want a saber, I will be back for all of these reasons.
All in all, if you are a huge fan of Dooku like I have been since I was a kid growing up with the Clone Wars, do not hesitate. The quality is out of this world and I can guarantee you will not regret it. Big thanks to Carl (the owner of ccsabers) for making a childhood dream come true!